Mitsu service menu

[typhoon]

Mitsubishi Service Menu Access Codes

Here is a table of activation codes for recent Mitsubishi RPTVs. Each of these codes is preceded by a press of the MENU button on the remote (V19 Adjustment Menu = "MENU-0-1-5-7"). When in the Convergence mode, the 6, 5, and 4 buttons on the remote select Misc, Coarse, and Fine adjustment modes.

Chassis
 VZ5
 VZ7
 
 VZ9
 
Aspect Ratio
 4:3
 4:3
 
 4:3
 

 VS-45603
 VS-45605
 
 VS-45609
 

 VS-50603
 VS-50605
 
 VS-50609
 

 VS-50604
 VS-50705
 
 VS-55609
 

 VS-50703
 VS-55705
 
 VS-60609
 

 VS-60603
 VS-60705
 
 VS-60719
 

 VS-60703
 VS-70705
 
 VS-70709
 

 
 
 
 
 

 VZ6
 VZ8
 
 V18
 

 4:3
 4:3
 
 16:9
 

 VS-50800
 VS-45607
 
 WS-55809
 

 VS-50803
 VS-50607
 
 WS-65809
 

 VS-60803
 VS-60607
 
 WT-46809
 

 VS-70803
 VS-50707
 
 WS-55819
 

 VS-80803
 VS-55707
 
 WS-65819
 

 
 VS-60707
 
 
 

 
 VS-70707
 
 
 

 
 
 
 
 

 V15
 V16N
 V17
 V19
 

 16:9
 4:3
 16:9
 16:9
 

 WS-65903
 VS-50805
 WT-46807
 WS-55859
 

 WS-73903
 VS-60805
 WT-55807
 WS-65869
 

 
 
 WT-65807
 WS-55909
 

 
 V16W
 WS-55857
 WS-65909
 

 
 16:9
 WS-65857
 WS-73909
 

 
 WT-46805
 WS-55907
 
 

 
 WS-55805
 WS-65907
 
 

 
 WS-65905
 WS-73907
 
 

 
 WS-73905
 WS-55908
 
 

 
 
 WS-65908
 
 
MENU/MODE
 
 
 
 
 
Option
 1-3-7-0
 1-2-7-0
 1-2-7-0
 0-1-7-0
 
Adjustment
 2-3-5-7
 1-2-5-7
 8-2-5-7
 0-1-5-7
 
Convergence
 2-3-5-9
 1-2-5-9
 8-2-5-9
 0-1-5-

[Mike Sheahan]

Thank you for posting the codes, but could you explain what exactly it means.

Are all the things above "Menu/Mode" just model numbers?  What are all the 4:3 and 16:9 things for?  Sometimes there are two or three right on top of each other.  I guess I'm just confused as to what are the codes, and what is all the other stuff?

Thanks again for posting them.

[oz]

I'm confused too. I know that hometheaterspot has a lot of codes and tweaks, but you have to pay to see them. Anyone else have them?

[drgingras]

First off, I don't condone service menu adjustments. You can cause major harm to your expensive TV if you make a mistake. No manufacturer will honor your warrantee if they find that you've been in their service menu. And, if you really must do this, pay the membership fee at HTS. You not only get the tweaks, but also the valuable help, tips, tricks and experience of all the contributors.

Second, I would hope that the OP can/will give credit to the site or person that this info. was gleaned from. Hate to think that I'm responding to something that was ripped without props.

That being said, think in blocks of 4 rows when reading typhoon's post. I used my model and known (verified) menu codes to section out and recombine the data as follows:

Chassis_Aspect_Ratio_Model_No_Option__Adjustmnt_Conv

VZ6____4:3_________VS-50803_1-3-7-0_2-3-5-7____2-3-5-9

VZ8____4:3_________VS-50607_1-2-7-0_1-2-5-7____1-2-5-9

__________________________________________________

VZ18___16:9________WS-65809_0-1-7-0_0-1-5-7___0-1-5-

I can only verify the codes for my Mits. Cannot vouch for the accuracy of the rest.

Be REALLY careful with this stuff, guys !

Dave

[Greg Oman]

Agreed.  Proceed with caution here, the service manual which is available for most late model Mitsubishi sets is about $65-- and fully documents the settings for your particular chassis, but really doesn't go into depth on how to use them.

I'm not saying do not do this (I have), but I am saying measure twice, cut once.  Document original setting, research, research, change one at a time.

A screwup requiring a non-warranty service call would pay for several Spot membership years.  Do your homework here folks.

Greg O.