RCA DTC-100 HD Receiver

[Randy Spaulding]

Does anyone have a DTC-100 RCA receiver they are using? If so, what channel numbers does Channel 10 show under? Mine are channel 8-1, 8-2, 8-3, and 8-4. I was told during the live chat with Jim Hall that they should be showing 10-1, 10-2, 10-3, 10-4. Same with channel 58 - He said it should be 1-1, etc and they're showing up on mine as 46-1, etc. He said it requires a firmware upgrade?

[Gregg Lengling]

You need to turn on the program guides and then do a channel scan.  After that it will show up properly.  I get the following
1, 1-1, 1-2, 1-3 (58, dig 58, 41 and 65), 4, 4-1 (4 and dig 4), 6, 6-1 (6 and dig6), and 10, 10-1, 10-2, 10-3, 10-4, 10-5( 10 can dig 10 and it's sisters)


------------------
Gregg R. Lengling
RCA P61310 61" 16x9
gregg@camelcomm.com

[Matt Heebner]

I have the DTC-100. In order to get the correct channel mapping, you need to have the "Off Air Guide" enabled, Go to Assistance...Off Air Guide.....Aquire. The OTA signals have  PSIP data that does the correct channel mapping. You might have to rescan. I think that might work. Also make sure you have the latest firmware update... version AO5.10. To check go to Assistance....Upgrades....Past Upgrades.

Hope this helps and welcome to MilwaukeeHDTV.org!

Matt

[Matt Heebner]

Gregg beat me to it!

Matt

[Randy Spaulding]

Hey thanks ... that worked!