Terk Multi-switch

[FeedingFrenzy]

I run my roof antenna right into my HDTV.  Now I have second HDTV.  So I can run the antenna feed into my multi-swith and then use a diplexer before each receiver and have antenna and DTV at each TV?  Pretty sure this is how it is done.  Just need one of guys to confirm.  Do I have to use "Terk" diplexer? Will I lose and picture quality running antenna through the multi-switch?

[Talos4]

You're over thinking the process.

Get one of these at Radio Shack...

http://www.radioshack.com/product/index.jsp?productId=2103927&cp=2032057.2032187.2032189.2032207&parentPage=family

Hook the cable from the antenna into the top.  Then take two more pieces of coax and connect to the bottom connectors,  the take one coax and hook it up the each of your TV's.

It really is that simple.

If you have generally less than 100' in total cable runs. I wouldn't worry about loss of signal.

If you start running upwards of 125 to 150 feet, then we'll talk more.

Good Luck!

[FeedingFrenzy]

Talos4,

Can you re-post the link?

[Talos4]

Here you go,

I don't know what happened.

http://www.radioshack.com/product/index.jsp?productId=2062050&cp=&origkw=splitters&kw=splitters&parentPage=search