Work around for Audio on Fox 47 WMSN-DT

[Scott Sippel]

Each night I have been checking fox 47 to see if they have fixed the audio yet.  Well, after I thought about kjarnolds post about the audio language display set to "English3 (stereo)" I realized that selecting a different audio language might result in sound.  By selecting the Audio Language Icon on my DTC-100 I switched from "English3 (stereo)" to English4 (Dolby Digital)" I was able to get sound.  

The Audio language icon is in the channel banner on the DTC-100, select it and change it.  That should result in sound for WMSN-DT.  

The only thing I found is that it sets itself back to "English3" if you change the
channel and return to 47-1.  They still need to fix something on their end but at least we can watch a digital Fox channel.

[Kevin Arnold]

Indeed, it does work. I agree, they must have something misprogrammed at the transmitter, but at least I can get a Fox feed (albeit 4 x 3) and never enhanced, but its better than analog.

[uplinkguy]

since we're talking about Fox 47....

Does anyone else notice hum bars rolling through their digital picture?

It isn't apparent on their analog channel or on local Charter cable.


5 tv stations down in this market one WB station to go.....

andy